Toyota Recalls — NHTSA Safety Database

EXTERIOR LIGHTING:HEADLIGHTS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 Corolla vehicles. The front headlights may have missing headlight aim markings, which can result in improperly aimed headlights during service. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: Incorrectly aimed headlights can reduce driver visibility or create a glare for oncoming traffic, increasing the risk of a crash.

EQUIPMENT:OTHER:LABELS

Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023-2025 Crown, and 2025 Camry Hybrid vehicles equipped with GST accessories. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.

STEERING

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Corolla and Corolla Hybrid vehicles. Due to cracks developed during the manufacturing process, the steering intermediate shaft assembly may fracture and possibly result in the shaft detaching from the steering column.

Risk: A steering shaft that detaches can result in a loss of steering control, increasing the risk of a crash.

STEERING:COLUMN

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Tacoma, 2023 Lexus RX350, RX350 Hybrid, RX500 Hybrid, 2023-2024 Lexus NX250, NX350, and NX350 Hybrid vehicles. An electrical connection inside the steering column's spiral cable assembly may be insufficiently welded, causing the connection to separate and deactivate the driver's air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: A deactivated driver's air bag that does not deploy as intended increases the risk of injury during a crash.

STEERING:COLUMN

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Toyota Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Tacoma, Lexus RX350, 2023-2024 NX250, and NX350 vehicles that may have been incorrectly repaired under previous NHTSA recall number 23V-480. An electrical connection inside the steering column's spiral cable assembly may be insufficiently welded, causing the connection to separate and deactivate the driver's air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: A deactivated driver's air bag will not deploy as intended, increasing the risk of injury during a crash.

SERVICE BRAKES, ELECTRIC:SOFTWARE/PROGRAMMING

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Corolla Cross Hybrid and 2023-2025 Corolla Hybrid vehicles. A software error in the skid control electronic control unit (ECU) may result in a loss of power brake assist when turning a corner.

Risk: A loss of power brake assist can extend the distance required to stop, increasing the risk of a crash.

EXTERIOR LIGHTING:BACK UP LIGHTS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.

Risk: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.

BACK OVER PREVENTION:SOFTWARE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

BACK OVER PREVENTION:SOFTWARE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

EQUIPMENT:OTHER:LABELS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.

EQUIPMENT:OTHER:LABELS

Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle increases the risk of a crash.

POWER TRAIN:AUTOMATIC TRANSMISSION

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.

Risk: Unexpected vehicle movement can increase the risk of a crash.

TIRES:SIDEWALL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Sequoia Hybrid, Tundra and Tundra Hybrid vehicles. The passenger-side front and rear tires may have inner sidewall damage, which can cause a sudden loss of tire pressure.

Risk: A sudden loss of tire pressure can result in a loss of vehicle control, increasing the risk of a crash.

EQUIPMENT:OTHER:LABELS

Gulf States Toyota, Inc. (GST) is recalling certain 2026 4Runner vehicles. The load carrying capacity modification label states the incorrect load carrying capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An incorrect load carrying capacity label may lead to improper loading of the vehicle, increasing the risk of a crash.

ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tundra vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause a main bearing to fail, which can result in an engine stall and loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

EQUIPMENT:OTHER:LABELS

Gulf States Toyota, Inc. (GST) is recalling certain 2023 Tundra pickup trucks equipped with non-skid spray-on bed liners. The load carrying capacity modification label may indicate less weight than the actual total weight of accessories installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. A software error in the combination meter's electronic control unit (ECU) may cause the Instrument Panel LCD display to go blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: A blank display will not show critical information such as the speedometer or warning lights, increasing the risk of a crash.

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Toyota Venza, 2023-2025 RAV4 Prime, RAV4, Highlander, GR Corolla, Crown, 2024-2025 Lexus TX, LS, Toyota Tacoma, Grand Highlander, and 2025 Lexus RX, Toyota Crown Signia, Camry, RAV 4 Plug-in Hybrid (PHEV), and 4 Runner vehicles. Due to an error in the instrument panel software at vehicle startup, the instrument panel may fail to display vehicle speed, brake system, and tire pressure warning lights.

Risk: An instrument panel display that does not show critical information can increase the risk of a crash or injury.

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Tacoma 4-wheel drive vehicles. The rear brake hoses can be damaged if mud and dirt builds up inside the rear wheels. This can result in a brake fluid leak.

Risk: A brake fluid leak can reduce braking ability and increase the risk of a crash.

POWER TRAIN:DRIVELINE:DRIVESHAFT

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 Tacoma and Tacoma Hybrid vehicles. The front driveshaft constant-velocity (CV) joint may deform and break.

Risk: A broken driveshaft can impair steering. Vehicles with full-time 4WD may experience a vehicle rollaway while parked without the parking brake applied. Both scenarios increase the risk of a crash.

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 RAV4 and 2025 Lexus NX vehicles. Some of the bolts that secure the front brake caliper and the wheel hub bearing may be loose, which can result in a damaged caliper brake hose or possible wheel detachment.

Risk: A damaged brake line can cause a brake fluid leak, reducing brake performance and increasing the distance required to stop the vehicle. Wheel detachment can result in a loss of vehicle control. Either condition increases the risk of a crash.

TIRES:VALVE

Gulf States Toyota, Inc. (GST) is recalling certain 2023 Toyota RAV4 vehicles equipped with 17" black alloy accessory wheels. During installation of the alloy wheels, the tire valve stem may have been improperly installed or damaged. In addition, the load carrying capacity label may state the incorrect weight. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: A damaged or improperly installed valve stem may allow air to leak and/or the tires to be underinflated, increasing the risk of tire failure and a crash.

FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. The plastic fuel tube routed near metallic brake lines may chafe against the brake lines and become damaged, possibly resulting in a fuel leak.

Risk: A fuel leak in the presence of an ignition source can increase the risk of a fire.

TIRES:TEMPORARY/EMERGENCY SPARE TIRE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Tundra, Tundra Hybrid, and Sequoia Hybrid vehicles. The steel chain used to secure the spare tire to the underside of the vehicle may have been insufficiently welded.

Risk: Chains that are not welded sufficiently can break and allow the spare tire to detach, increasing the risk of a crash.

STRUCTURE:BODY

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles that may be equipped with a Toyota genuine accessory tonneau cover. The tonneau cover attachment joints may come loose and allow the cover to detach.

Risk: A tonneau cover that detaches while driving can become a road hazard, increasing the risk of a crash.

EQUIPMENT:OTHER:LABELS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Tundra and Tundra Hybrid vehicles equipped with a spray-on bed liner accessory. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle increases the risk of a crash.

ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

CHILD SEAT:VEHICLE LATCH ANCHOR

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tacoma vehicles. One or more of the individual welds in the upper child seat anchors may be insufficient. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 225, "Child Restraint Anchorage System."

Risk: An insufficient weld may prevent the child seat from being anchored properly, allowing the seat to move during a sudden stop or crash, increasing the risk of injury.

POWER TRAIN:AXLE ASSEMBLY

Toyota Motor Engineering & Manufacturer (Toyota) is recalling certain 2022-2023 Tacoma vehicles. The axle shaft sub-assembly may separate from the axle housing due to debris causing improperly secured fasteners.

Risk: Axle shaft separation can cause a loss of vehicle stability and brake performance, increasing the risk of a crash.

BACK OVER PREVENTION:DISPLAY FUNCTION

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview camera that fails to display an image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

SEATS:CRITICAL FASTENERS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 RAV 4 vehicles. The front seat brackets for the seat rails may be welded improperly.

Risk: Improperly welded seat brackets can prevent the seat from adequately restraining an occupant during a crash, increasing the risk of injury.

SEATS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Camry and Camry Hybrid vehicles. The second-row center and right-side seats may have insufficiently welded head restraint brackets. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 202, "Head Restraints."

Risk: A head restraint bracket that is insufficiently welded may not properly restrain an occupant during a crash, increasing the risk of injury.

WHEELS:LUGS/NUTS/BOLTS/STUDS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Camry and Camry Hybrid vehicles. The lug nuts that attach the wheels to the vehicle may be loose, which can result in wheel detachment.

Risk: A wheel that detaches from a moving vehicle can cause a loss of vehicle control, increasing the risk of a crash.

HYBRID PROPULSION SYSTEM: INVERTER

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025-2026 Camry Hybrid and 2026 Corolla Cross Hybrid vehicles. A bolt inside the inverter may not have been tightened properly, causing incomplete contact at the inverter terminal.

Risk: Incomplete contact can cause a loss of motive power, increasing the risk of a crash. In addition, a loose bolt can cause an electrical short while the vehicle is powered on, increasing the risk of a fire.

SEAT BELTS:REAR/OTHER:WEBBING

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 Toyota Camry Hybrid, Lexus NX250, NX350, NX350 Hybrid, 2024-2025 Lexus RX350, RX350 Hybrid, and RX500 Hybrid vehicles. The second-row center seat belt webbing may be damaged. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."

Risk: A damaged seat belt may not adequately restrain an occupant, increasing the risk of injury during a crash.

EQUIPMENT:OTHER:LABELS

Southeast Toyota Distributors, LLC (SET) is recalling certain 2023 Toyota 4Runner vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle increases the risk of a crash.