Nissan Recalls — NHTSA Safety Database

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

Nissan North America, Inc. (Nissan) is recalling certain 2025 Murano, Pathfinder, and INFINITI QX60 vehicles. One or both front brake caliper assemblies may have reduced strength and could break. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

Risk: A broken front brake caliper can cause a loss of front brake function, increasing the risk of a crash.

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Nissan North America, Inc. (Nissan) is recalling certain 2024 Titan, Frontier, Infiniti QX60, Pathfinder, 2023-2024 Sentra, Versa, Kicks, Infiniti QX50, and 2023 Rogue vehicles. Due to a manufacturing issue, the driver's air bag inflator may absorb moisture, and cause the air bag to deploy improperly.

Risk: An air bag that deploys improperly may not protect the driver as intended during a crash, increasing the risk of injury.

ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Nissan North America, Inc. (Nissan) is recalling certain 2023-2025 Rogue vehicles equipped with 3-cylinder 1.5L variable compression turbo (VC-Turbo) engines. Increased temperatures can break down the engine oil, which may cause the engine bearings to seize and become damaged, leading to engine failure.

Risk: Engine failure can cause a loss of drive power, increasing the risk of a crash. A bearing failure may cause a breach in the engine block, allowing hot oil to be discharged, increasing the risk of an engine fire.

SEAT BELTS:PRETENSIONER

Nissan North America, Inc. (Nissan) is recalling certain 2024 Pathfinder and Infiniti QX60 vehicles. The lap belt pretensioner in the left-side front seat belt assembly may be improperly secured, due to a missing rivet. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208 "Occupant Crash Protection," 209 "Seat Belt Assemblies," and 210 "Seat Belt Assembly Anchorages."

Risk: An unsecured lap belt pretensioner will not properly restrain an occupant during a crash, increasing the risk of injury.

SEATS:CRITICAL FASTENERS

Nissan North America, Inc. (Nissan) is recalling certain 2023 Rogue, Pathfinder, and Infiniti QX60 vehicles. The driver's powered seat may not be fully secured to the seat frame, causing the seat frame welds to detach from the rear inboard seat bracket.

Risk: An unsecured seat with broken welds may not properly restrain an occupant during a crash, increasing the risk of injury.

SEATS

Nissan North America, Inc. (Nissan) is recalling certain 2026 Kicks and Sentra vehicles. The hook bracket of the front seat frames may be insufficiently welded, which can cause the front seat frames to become loose. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 207, "Seating Systems" and 210, "Seat Belt Assembly Anchorages."

Risk: A loose seat may not restrain the occupant as intended, increasing the risk of injury during a crash.

SEATS

Nissan North America, Inc. (Nissan) is recalling certain 2025 Sentra vehicles. The driver's seat frame may not be fully secured to the outer side of the seat track. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."

Risk: An unsecured driver's seat may not adequately restrain the driver during a crash, increasing the risk of injury.

VISIBILITY:WINDSHIELD

Nissan North America, Inc. (Nissan) is recalling certain 2025 Sentra vehicles. The windshield glass may have visible air bubbles, which can obscure the driver's visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

Risk: Reduced visibility while driving can increase the risk of a crash.

LATCHES/LOCKS/LINKAGES:DOORS:LATCH

Nissan North America, Inc. (Nissan) is recalling certain 2025 Altima, Sentra, 2025-2026 Frontier, and 2026 Kicks vehicles. The door strikers may have been improperly welded and break, allowing the door to open while moving. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 206, "Door Locks and Door Retention Components."

Risk: A door that opens unexpectedly while the vehicle is in motion increases the risk of injury or a crash.

POWER TRAIN:DRIVELINE:DRIVESHAFT

Nissan North America, Inc. (Nissan) is recalling certain 2025 Nissan Sentra vehicles. The front left-side driveshaft may not be fully seated in the continuously variable transmission (CVT) assembly, which can cause a transmission fluid leak and loss of drive power.

Risk: An unexpected loss of drive power can increase the risk of a crash. In addition, a driveshaft that is not fully engaged can result in a vehicle rollaway if the parking brake is not applied, increasing the risk of a crash or injury.

POWER TRAIN:DRIVELINE:DRIVESHAFT

Nissan North America, Inc. (Nissan) is recalling certain 2024 Sentra vehicles. The front left-side driveshaft may not be fully seated in the continuously variable transmission (CVT) assembly, or may have a loose or missing retaining clip, which can cause a transmission fluid leak and loss of drive power.

Risk: An unexpected loss of drive power can increase the risk of a crash.

FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:THROTTLEBODY/MANIFOLD

Nissan North America, Inc. (Nissan) is recalling certain 2024-2025 Rogue vehicles equipped with 3-cylinder 1.5L variable compression turbo (VC-Turbo) engines. The gears in the electronic throttle body assembly may break.

Risk: Broken throttle body gears can cause a loss of drive power, increasing the risk of a crash.

EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE

Nissan North America, Inc. (Nissan) is recalling certain 2025 Nissan Frontier vehicles. Due to a software logic error, the daytime running lights may dim unexpectedly when the idle start-stop feature cycles the engine from off to on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: Daytime running lights that dim unexpectedly may cause confusion to other vehicles or pedestrians, increasing the risk of a crash.

BACK OVER PREVENTION:SOFTWARE

Nissan North America, Inc. (Nissan) is recalling certain 2025 Frontier and Kicks vehicles. The center information display unit may display a blank screen when shifted into reverse. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview image that does not display can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

VISIBILITY:WINDSHIELD

Nissan North America, Inc. (Nissan) is recalling certain 2024 Nissan Sentra vehicles. The windshield may have air bubbles on the front lower driver's side, which can obscure the Vehicle Identification Number (VIN). As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

Risk: An owner who cannot see their VIN clearly may not recognize their vehicle is involved in a safety recall, and may not have the recall remedy performed, which could increase the risk of injury, fire, or a crash.

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Nissan North America, Inc. (Nissan) is recalling certain 2024 Frontier vehicles. The front right-side lower link may have been manufactured with an oversized ball joint, which can result in corrosion and ball joint separation from the front right-side lower link.

Risk: Ball joint separation can cause a loss of steering control, increasing the risk of a crash.

EXTERIOR LIGHTING:HEADLIGHTS

Nissan North America, Inc. (Nissan) is recalling certain 2024 Nissan Frontier vehicles. The right-side headlight assemblies may have missing or illegible headlight aim markings, which can result in improperly aimed headlights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: Improperly aimed headlights can result in insufficient illumination of the road, decreasing the driver's visibility and increasing the risk of a crash.

TIRES:BEAD

Nissan North America, Inc. (Nissan) is recalling certain 2023 Titan and Frontier vehicles. The tires may have a tear in the inner bead which can cause a rapid loss of tire pressure.

Risk: A rapid loss of tire pressure while driving can lead to a loss of vehicle control, increasing the risk of a crash.

AIR BAGS:CRITICAL FASTENERS

Nissan North America, Inc. (Nissan) is recalling certain 2025 Altima vehicles. The front passenger air bag and front passenger knee air bag may have been installed with incorrect mounting fasteners, which can cause the air bags not to deploy as intended.

Risk: Air bags that do not deploy as intended increase the risk of injury in a crash.

STEERING:RACK AND PINION

Nissan North America, Inc. (Nissan) is recalling certain 2024 Altima vehicles. The bolts connecting the electronic power steering unit to the steering rack may loosen, resulting in a loss of steering control or steering lock-up.

Risk: A loss of steering control or steering lock-up can increase the risk of a crash.

TIRES:TEMPORARY/EMERGENCY SPARE TIRE

Nissan North America, Inc. (Nissan) is recalling certain 2026 Rogue vehicles. The incorrect-size spare tire may have been installed, which does not match the tire size and inflation pressure information on the tire placard. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: Incorrect spare tire pressure information on the placard may lead to incorrect inflation of the spare tire, increasing the risk of a crash.

POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)

Nissan North America, Inc. (Nissan) is recalling certain 2026 Rogue vehicles. The instrument panel may not display the transmission gear selection indicator. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 102, "Transmission Shift Lever Sequence, Starter Interlock, and Transmission Braking Effect."

Risk: A missing gear selection indicator may lead to unintended vehicle movement or a vehicle rollaway, increasing the risk of a crash.

BACK OVER PREVENTION

Nissan North America, Inc. (Nissan) is recalling certain 2024-2025 Rogue and 2025 INFINITI QX80 vehicles. A software error may cause the rearview camera to display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: The loss of the rearview camera image while in reverse can reduce the driver's rear visibility, increasing the risk of a crash.

ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Nissan North America, Inc. (Nissan) is recalling certain 2021-2024 Rogue, 2019-2020 Altima, 2019-2022 Infiniti QX50, and 2022 Infiniti QX55 vehicles equipped with 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. The engine bearings may have manufacturing defects that can lead to engine failure.

Risk: Engine failure increases the risk of a crash. A bearing failure may cause a breach in the engine block, allowing hot oil to be discharged, increasing the risk of an engine fire.

SEAT BELTS:CRITICAL FASTENERS

Nissan North America, Inc. (Nissan) is recalling certain 2023 Nissan Rogue vehicles. The fastener in the rear seat belt anchor attachment points may not have been tightened properly and can loosen over time.

Risk: A loose rear seat belt anchor fastener may not properly restrain an occupant in the event of a crash, increasing the risk of injury.

SEAT BELTS:PRETENSIONER

Nissan North America, Inc. (Nissan) is recalling certain 2023 Rogue vehicles. The driver and front passenger seat belt pretensioners may have been incorrectly manufactured, which can cause the seat belts to not properly restrain occupants. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection," 209, "Seat Belt Assemblies," and 210 "Seat Belt Assembly Anchorages."

Risk: Improperly restrained occupants have an increased risk of injury during a crash.